logo
RUS| ENG
•   Main   About   Products     Prices   Accessories   Contacts  •
Stark    Akcent II            
Viola

Aerodynamics

Viola is an excellent glider both for flights in F3J, and for flights in F3B/F3F. A wing with the high aspect ratio and airfoils of wing HQ/W, allow to maintain model in very big range of speeds. Thanks to applied twists on a wing the model very well shows thermals and has very good wind penetrating

Construction

The demountable V-shaped stabilizer and wing from three demountable parts allow to transport model easily.

Wing

The wing is made of glass fabric/balsa/glass fabric sandwich. The wing spar is made of high modulus carbon. The wing can be made in three constructive versions: standard, D-box and full carbon. The standard wing will approach for flights more in F3J. D-box wing has well proved to be both at flights in F3J, and at flights on slopes in dynamic soaring. Full carbon wing has the strengthened spar, therefore it is recommended for flights in F3F/F3B.


Stabilizer

The one piece V- stabilizer possesses high durability and small weight. Such characteristics allow to subject the stabilizer to full flight and launch loadings, thus the small weight of the stabilizer allows not to load strongly nose of model for reception of the recommended CG.


Fuselage

The fuselage is made of two parts: a fuselage and a cap. Such design essentially facilitates process of installation of equipment and its service. In the version of model with full carbon and D-box wing the fuselage is made with carbon reinforcements necessary for rigid operation of model at flights in F3B/F3F. The model nose can be made 2.4 Hhz friendly



Complete set:

  1. Wing
  2. Fuselage
  3. Stabilizer
  4. Wing and tail screws
  5. Horns
  6. Tow hook
  7. Wing joiners
  8. Servo frame for fuse
Available paint colors:
BLUE GREEN WHITE BLACK
RED PINK ORANGE YELLOW

Paint schemes:

Accessories for the model (such as servos, accumulators, and other) you can find in the page Accessories